Metrology Engineering

ISO 10360-2 Volumetric Measurement Uncertainty for Coordinate Measuring Machines calculator

ISO 10360-2 Volumetric Measurement Uncertainty for Coordinate Measuring Machines engineering calculator.

Quick Answer

Calculate ISO 10360-2 Volumetric Measurement Uncertainty for Coordinate Measuring Machines

Calculator

Volumetric measurement uncertainty (m)
—

ToolFusion Engineering Network

Need Equipment or a Supplier for This Project?

Use your calculation result to continue with equipment selection, supplier discovery, engineering support, or project evaluation.

Find Engineering Solutions →

Result Interpretation

ISO 10360-2 Volumetric Measurement Uncertainty for Coordinate Measuring Machines calculator computes Volumetric measurement uncertainty in m using the defined engineering formula and the input values provided. Volumetric measurement uncertainty is expressed in m. No universal acceptance threshold is defined by this calculator.

Worked Example

Verified calculation

Given:

  • X-axis length-dependent error = 1.2E-6
  • Y-axis length-dependent error = 1.3E-6
  • Z-axis length-dependent error = 1.4E-6
  • XY-plane squareness-induced error = 7.0E-7
  • XZ-plane squareness-induced error = 6.0E-7
  • YZ-plane squareness-induced error = 5.0E-7

Expected Result:

  • Volumetric measurement uncertainty = 2.2912878474779E-6

Engineering Interpretation:

Under the given input conditions, the calculated result is: Volumetric measurement uncertainty = 2.2912878474779E-6 m.

The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from automatically validated test cases.

Formula / Method

volumetric measurement uncertainty = sqrt(pow(x-axis length-dependent error, 2) + pow(y-axis length-dependent error, 2) + pow(z-axis length-dependent error, 2) + pow(xy-plane squareness-induced error, 2) + pow(xz-plane squareness-induced error, 2) + pow(yz-plane squareness-induced error, 2))

Formula family: formula_metrology_cmm_volumetric_error_budget_calculator_iso_10360_

Variables

SymbolLabelRoleDescription
Lx X-axis length-dependent error INPUT X-axis length-dependent error
Ly Y-axis length-dependent error INPUT Y-axis length-dependent error
Lz Z-axis length-dependent error INPUT Z-axis length-dependent error
Lxy XY-plane squareness-induced error INPUT XY-plane squareness-induced error
Lxz XZ-plane squareness-induced error INPUT XZ-plane squareness-induced error
Lyz YZ-plane squareness-induced error INPUT YZ-plane squareness-induced error
result Volumetric measurement uncertainty OUTPUT Volumetric measurement uncertainty

Calculation Steps

  1. Enter the x-axis length-dependent error in m.
  2. Enter the y-axis length-dependent error in m.
  3. Enter the z-axis length-dependent error in m.
  4. Enter the xy-plane squareness-induced error in m.
  5. Enter the xz-plane squareness-induced error in m.
  6. Enter the yz-plane squareness-induced error in m.
  7. Step 1: Compute volumetric measurement uncertainty.
  8. Read the volumetric measurement uncertainty (m) from the results.

Engineering Summary

Calculate ISO 10360-2 Volumetric Measurement Uncertainty for Coordinate Measuring Machines

Frequently Asked Questions

What does this calculator calculate?

The ISO 10360-2 Volumetric Measurement Uncertainty for Coordinate Measuring Machines calculator estimates Volumetric measurement uncertainty based on the input parameters you provide

Why is x-axis length-dependent error important in this calculation?

axis length-dependent error is used directly in the calculation of volumetric measurement uncertainty. Its effect on the result depends on the complete formula and the values of the other inputs.. When you enter x-axis length-dependent error in m, the calculator uses it in the engineering formula to compute the output

How should I interpret the result volumetric measurement uncertainty?

The calculator outputs volumetric measurement uncertainty in m. The result is computed directly from the input values using the defined engineering formula

What units should I use for the inputs?

Enter each value in the units shown next to the input field: X-axis length-dependent error (m), Y-axis length-dependent error (m), Z-axis length-dependent error (m), XY-plane squareness-induced error (m), XZ-plane squareness-induced error (m), YZ-plane squareness-induced error (m). Make sure all inputs use the specified units for consistent results

What assumptions does this calculator use?

This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment

Related Tools

Browse More Tools

Explore the full index of engineering calculators on this vertical site.